Humax F2-Green - Manual (Page 35)

Select the default language for subtitle when changing services.
Language provided:English, French, German, Italian, Spanish,
Portuguese, Hungarian, Finnish, Danish, Swedish, Norwegian,
Greek and more..
You can set the Current Time and Wakeup Time in this mode.
Furthermore, the Service Number in the Wakeup mode and Sleep
Time (standby mode) can be set. When a VCR is connected,
recording can be automatically done according to Wakeup/Sleep
Time Setting.
To set the Current Time, enter the Offset value using the
standardised information of current service area.
The time setting will be used as the standardised time for the
I-Plate, TV EPG, Radio EPG, Wakeup and Sleep Timer.
To change the Current Time:
1. Press the button to move to the Item window.
2. Use buttons to select time, the unit is half an hour in the
item window.
Current Time is based on TDT (Time and Data Table) at the
stream of the current service.
1. Move the Category cursor to Wakeup Time and then move to
the Item window using the OK or buttons.
2. Select Enabled using the OK button. The Time Input window
will appear.
3. Enter the time in the order of hour and minute using the
NUMERIC buttons(0~9).
4. Press the OK button to complete Wakeup Time setting.
Subtitle Language
Time Setting
Current Time
Time Offset
Wakeup Time
Main Menu Guide
GB34