Humax F2-Green - Manual (Page 25)

Main Menu Guide
Shows a Simple EPG like an Information box.
This mode shows in the A/V playback mode.
Black vertical line
: Indicates the current time.
Black/white bar : Shows the proceeding state of programme.
Time range of bar : This consists of three blocks by 30 minutes
per block.
Shows the programme lists that you have already reserved on the
TV EPG ( or Radio EPG) or Information box.
Maximum twenty programmes can be reserved.
This programme list includes service name, date, duration time,
reservation mode and event name.
To cancel a reservation, follow the same steps given in the “To
cancel reservation for a reserved programme” section for the
Advanced EPG mode.
Enter the PIN code to access the Channel Searching menu as you
access the Parental Control menu.
Press the OK button to start Service Search after setting the
parameters.
** The default PIN code is
.
Selects the antenna and LNB settings for Service search.
As you can change the settings for 22KHz Tone and DiSEqC switch,
there are 32 possible Antenna Setting for use.
The values that are set in this menu will be available for selection in
other channel searching menus.
Simple EPG (TV/Radio)
Reserved EPG
Antenna Setting
GB24
3. Channel Search
0000