Humax F2-Green - Manual (Page 33)

Main Menu Guide
When you want to change the audio language of current service,
press MENU(
) button firstly.
Use the buttons to select Sound Track and press the OK button.
The soundtrack menu is displayed on the top to left side of the
screen.
To change the audio language:
1. Move the cursor to the desired language on the Category window
using the buttons.
2. Press the button to move to Operation window, and then select
one among Both, Left and Right from the Audio output item.
3. EXIT button : When this button is pressed, the Soundtrack OSD
will disappear keeping the selected Soundtrack
language constant.
When the current service is switched, the audio language returns
to the audio language that was selected in previous service.
lf the returned audio language is invalid, the audio language that
you selected from the audio language menu has the priority of
playback.
Soundtracks broadcast in Dolby Digital are indicated by Dolby
Digital symbols either side of the respective language selection in
the menu. By selecting such a soundtrack the Dolby Digital audio
will be output by the optical S/PDIF on the STB.
This can be decoded by an external Dolby Digital television or
amplifier, for example.
Note : When Dolby Digital is selected and actually broadcast, Dolby
Digital will be output prior to MPEG. Dolby Digital will be
output only through the optical S/PDIF on the STB.
5. Sound Track
GB32