Humax F2-Green - Manual (Page 17)

• Rename
To rename the current service:
1. Move the cursor and select Rename on the operation window
and press the OK button to rename current service.
The Input Text window will appear.
2. Enter the service name using the NUMERIC buttons(0~9) on
the Remote Control unit.
3. The Input text window will appear and you can type the
Channel Name directly.
When you input the Channel Name with the remote control unit,
the first press of a numeric button is recognized as a numeric
input, and the next press of the same button is recognized as
an alphabet input. (For example, if you press the numeric button
1 repeatedly, the input character switches in the sequence of
1
➝ A ➝ B ➝ C ➝ 1.) Press the button to input the next
character.
Press the button to cancel and press the OK to confirm.
• Save
To save the changed attributes:
1. Select Save on Operation window using the buttons
and then press the OK button.
Function Guide
GB16