Configuring agents for data collection, Supported rmon agents and interfaces, Onfiguring – HP Transcend Traffix Manager User Manual
Page 51: Gents, Ollection, Chapter 6
6
C
ONFIGURING
A
GENTS
FOR
D
ATA
C
OLLECTION
This chapter describes how to use Traffix
™
Manager to identify and
enable RMON agents on your network for data collection.
It contains the following sections:
■
Supported RMON Agents and Interfaces
■
Finding Agents for Data Collection
See
on
for more information about RMON
agents.
Supported RMON
Agents and
Interfaces
Traffix Manager supports all agents which implement all the relevant
groups of RMON-1 and RMON-2 standards.
Refer to RFCs 1757, 2021 and 2074 for a list of the RMON groups which
are retrieved by Traffix Manager:
■
RMON-1 Request for Comment:
http://www.it.kth.se/docs/rfc/rfcs/rfc1757.txt
■
RMON-2 Request for Comment:
http://www.it.kth.se/docs/rfc/rfcs/rfc2021.txt
■
RMON-2 Protocol Identifiers:
http://www.it.kth.se/docs/rfc/rfcs/rfc2074.txt
See
for a list of interface types supported by Traffix Manager.
See
http://www.3com.com/network_management/probe_interop
for a
list of third-party agents which are supported by Traffix Manager.