Hughes AN6-098P - Manual (Page 61)

Chapter 5 • Installing a cradle-type radio assembly
1037312-0001 Revision A
43
Chapter 5
Installing a cradle-type radio assembly
This chapter applies to the cradle-type radio assembly only. If
you are installing a J-type radio assembly, go to Chapter 4 –
Installing a J-type radio assembly, on page 31.
This chapter includes:
• Installing the radio assembly on page 44
• Setting polarization for the cradle-type radio on page 47
CAUTION
• Do not remove the protective packing material from the
feed horn window until installation of the radio
assembly is complete.
• Be careful not to damage the feed horn window. Do not
touch the plastic film.