HP 618 - Manual (Page 40)

Chapter 5: Sharing Images 40 Transferring Images to Your Computer
Figure 23: Connecting the USB Cable to the Camera 4 Open the door to the camera’s connector compartment and connect the square end of the USB
cable to the bottom (USB) connector (see Figure 23).
5 Set the camera to PC Connect mode .
6 Power on the camera. Within a few seconds, your computer detects the camera on the USB port.
What happens next depends on what version of Windows your computer is running:
Windows Me Windows Me Windows Me Windows Me Your computer runs the Microsoft Scanner and Camera
Wizard. Follow the prompts in the Wizard to copy the
images to your computer.
Windows 98 Windows 98 Windows 98 Windows 98
or 2000
or 2000 or 2000 or 2000
The main window of the HP Photo Imaging Software
opens. Do the following:
1. Click Unload Camera
Unload Camera Unload Camera Unload Camera in the main window.
2. Click the Start Start Start Start button in the Unload Images window.
The images are copied to your computer.