Installing an expansion board, Installing an – HP SAS DL360 User Manual
Page 55

Hardware options installation
55
5. Remove the expansion board.
Installing an expansion board
1. Power down the server ("Powering down the server" on page
2. Extend the server from the rack, if applicable ("Extending the server from the
3. Remove the access panel ("Removing the access panel" on page
4. Remove the PCI riser board assembly ("Removing PCI riser board assembly"
on page
5. Remove the expansion slot cover from the PCI riser board assembly.
6. Align the expansion board with the guiding groove.
7. Press to release the expansion board retainer clip.
This manual is related to the following products: