Handspring 270 - Manual (Page 180)

Page 180 Setting Preferences for Your Communicator
4. Tap the Dialing pick list and select TouchTone or Rotary.
Note: Select Rotary only if your telephone service does not support TouchTone dialing.
5. Tap the Volume pick list and select the speaker volume.
6. Tap Details.
7. Enter the initialization string appropriate for your communicator.
8. Hold Option and press Return twice to return to the Connection Preferences screen.
Digitizer Preferences
The Digitizer Preferences screen opens the digitizer calibration screen. This is the same screen
that appears when you start your communicator for the first time. You can recalibrate your screen
after a hard reset, or if your digitizer drifts.