HP 2000491 - Manual (Page 141)

Initial Configuration 135
Initial Configuration
Configuring Video
You may have to optimize your HP Digital Entertainment
Center video configuration to get the best image on your
TV/display screen.
Configuring Video Output
You can configure your HP Digital Entertainment Center
video for dual-display. For instance, you can view the
screen on your TV and your monitor if both are
connected. You can also set up additional displays. See
“Video Out to TV and Monitor” on page 72 to connect
your TV and monitor.
If you have a multichannel sound system, and the
broadcast is only 2-channel, you may not hear all the
sound; you may need to change your audio settings to
2.0/2.1. Then change the settings back for multichannel
broadcasts.
Video software changes periodically; check HP Support
for updates. Go to http://www.hp.com/support
and select your model number.
Select the configuration that most closely
matches your home system. See:
“Configuring Video Output” on page 135
“Dual screen” on page 136
“Adjusting the Desktop Display” on page 139
“Tuning the Desktop Display” on page 139
n
Your TV and monitor must be connected to
the HP Digital Entertainment Center before
turning on the power to see the display on
two screens.