HP MP200 - Manual (Page 9)

4 5
En
gl
ish
En
gl
ish
HDMI receiver or HDMI TV set. This is the preferred connection method.
Component This high definition port is sometimes referred to as the YPbPr port. In
the case where your TV does not support HDMI, or if you do not have a free HDMI
port, you can use this to connect your media player to your TV or stereo receiver. Use
the bundled cable in order to make this connection.
Composite Video (CVBS): This type of video connection only supports standard
definition video playback. Only use this port if your TV does not have high definition
playback capabilities.
Audio connection: Please select one of the following connections in order to connect
the mp200 audio to your TV set or S/PDIF capable receiver.
HDMI output: HDMI can carry audio as well as video information. If you connect
using HDMI, then you may not need to connect a separate audio connection.
AUDIO L/R: These ports provide the analog stereo audio channels to your TV set or
stereo receiver.
S/PDIF: This is the TOSLINK (optical) digital audio output connection to connect your
mp200 to your audio receiver.
Ethernet port: This is the Ethernet port for accessing content through your Local
Network.
DC IN: This connects to the DC output of the Power Adapter. The power requirement
is 12Vdc, 1.5 A.