HP COMPAQ DX2718 MT - Manual (Page 17)

Service Reference Guide 483941-001 2–9
Setup Utilities and Diagnostics Features
Power
Management
Setup HPET Support Disable/ enable HPET feature, only can be
visible for Vista OS.
HPET Mode 32 bit mode/64 bit mode. View only, and
only can be visible for Vista OS.
WDRT Support Disable/ enable WDRT feature, only can be
visible for Vista OS.
WDRT Run/Stop Run/Stop. View only, and only can be visible
for Vista OS.
WDRT Count 1023. View only, and only can be visible for
Vista OS.
ACPI Function Enables/disables ACPI functions. Changing
this item can make the existing OS unusable.
ACPI Suspend Type Allows you to set type of ACPI suspend to:
• S1 (POS)
• S3 (STR)
Restore On AC/Power Loss Allows you to select system power loss
behavior:
• On
• Off
• Last State
PCI-E Wake on PME Disable/ enable PCI-E wake up function
Resume On PME Disables/enables Resume by PME.
Wake On Ring Disables/enables Resume on Ring.
Resume On Alarm Disables/enables RTC alarm.
Date (of Month) Alarm If Resume by Alarm is enabled, allows you to
select the day of the month for resumption of
RTC alarm.
Time (hh:mm:ss) Alarm If Resume by Alarm is enabled, allows you to
select what time the RTC alarm will resume.
PnP/PCI
Configurations Reset Configuration Data Disables/enables automatic reconfiguration.
The default is Disabled. Select Enabled to
reset Extended System Configuration Data
(ESCD) when you exit Setup, if you have
installed a new add-on and the system
reconfiguration has caused such a serious
conflict that the OS cannot boot.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.