HP COMPAQ DX2718 MT - Manual (Page 14)

2–6 483941-001 Service Reference Guide
Setup Utilities and Diagnostics Features
Advanced
BIOS Features
(continued) Removeable Device Priority Allow you to select FDD or USB-FDD as the
first removeable device.
Hard Disk Boot Priority Allows you to specify the order of attached
hard drive devices (such as USB HDD
storage, USB2 Drive Key, or USB flash
media, IDE HDD, SATA HDD or bootable
add-in cards). The first drive in the order has
priority in the boot sequence and is
recognized as drive C (if any devices are
attached).
CD-ROM Boot Priority Allows you to specify the order of attached
optical drive device.
Network Boot Priority Allows you to specify the order of network
device.
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device Allows you to specify which devices will boot
first, second, and third, or to disable any of
the three:
• Removable
• Hard Disk
• CD-ROM
• Network
• Disabled
✎
MS-DOS drive lettering assignments
may not apply after a non-MS-DOS
operating system has started.
Boot Other Device Disables/enables boot other device.
Load Boot Menu Selectable Disables/enables boot menu selectable
APIC Mode Disables/enables the APIC mode.
Modifiable when Hyper-Threading
Technology is DISABLED.
Hyper-Threading Technology Disable/ enables Hyper-Threading
technology. This item will show when the
CPU supports Hyper-Threading technology.
System Keyboard Allows you to set system keyboard to absent
or present.
Boot Up NumLock Status Allows you to set the default NumLock status
to off or on.
Security Option Allows you to set the security option to Setup
or System so that the password is required
every time the system boots or only when
entering Computer Setup.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.