Horizon Navigation NavMate Car GPS Receiver - Manual (Page 44)

30 Selecting a Destination
NavMate Navigation System
Screen 14. Select Entrance/Exit Screen
Depending on the freeway name previously selected, using the and
buttons to highlight either “Entrance” or “Exit,” as appropriate. Then, press
.
A Select Entrance screen (or Select Exit screen, if applicable) is displayed,
listing all entrances/on ramps (or exits/off ramps) to the previously selected
freeway.
Screen 15. Select Entrance Screen
The nearest entrance (or exit) is highlighted and those further away in each
direction from the highlighted entrance are then listed. Straight-line distance is
shown at the top of the screen.
After selecting an entrance (or exit), the Select Route Criteria screen is
displayed. Refer to “Selecting Route Criteria” on page 31 for more details.
ENTER