Hand Held Products 7900 - Manual (Page 95)

Dolphin® 7900 User’s Guide Rev F
10/16/07
8 - 11
7. Select Paste on the popup menu and the LeWM*.cab file appears in the folder.
8. Press and hold the Red + Tab keyboard buttons to cold boot the terminal. The Client installs during AutoInstall.
9. When AutoInstall is complete, a icon appears in the command bar on the Today screen.
For more information, see Opening the Client on page 8-12.
AP Search Threshold
If you are using one of these authentication methodologies, you need to configure your 802.11b connection here, NOT
through 802.11b Settings. However, if you want to set the AP Search Threshold above the default setting of Low Density,
you do need to change that setting in 802.11b Settings; for details, see
Network Profile Tab on page 8-6.
Required Network Configuration Information
Because the Client accesses a network that is protected by the IEEE 802.1X protocol, you must configure EAP data
communication to match your network server parameters. If the EAP configuration doesn’t match your network configuration, you
can’t access the network. Therefore, make sure you have the correct network server parameters on hand when you configure
the client.
!