Using the status icon, Using the status icon -9, In the command bar; see – Hand Held Products 7900 User Manual
Page 93
8 - 9
Using the Status Icon
You access the 801.11b Settings by tapping the Status icon once on the Today screen
. The following menu pops up:
Note: The Status Icon changes to a crossed lock
as a warning that you may have entered a wrong key (WEP Key mismatch)
for the WEP-On AP or a station.
Menu Option
Description
Wireless Radio On
Turns on the radio. LED is on and the Link Icon displays with signal strength.
Wireless Radio Off
Turns off the radio. A pop-up window will ask for your confirmation. If confirmed,
the LED will be off and the Status icon will change color from green to red on the
top without signal strength displayed. The WLAN card/module will stop functioning.
Remove Status Icon
Removes the Status Icon from the bottom tray. A pop-up
window asks you to confirm.
If confirmed, the Status icon does not display in the task tray,
and you will need to go to Start > Settings > Connections
tab > 802.11b Settings in the future.
Wireless Network Status
Opens the Status tab.
Configuration
Opens the Config tab.
Advanced Configuration
Opens the Advanced tab.
Version Information
Opens the About tab.