HP AMS DL320 - Manual (Page 18)

Server operations 18
5. Remove the PCI riser board assembly.
Installing the PCI riser board assembly
CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all
AC power cords before removing or installing the PCI riser board assembly.
1. Install the PCI riser board assembly.
2. Install the access panel (" Installing the access panel " on page 17 ).
3. Install the server into the rack (" Installing the server into the rack " on page 25 ).
Removing the fan assembly
1. Power down the server (" Powering down the server " on page 15 ).
2. Remove the server from the rack (" Removing the server from the rack " on page 16 ).
3. Remove the access panel (" Removing the access panel " on page 17 ).