3 models sc1000 and sc2000, 1 differences, 2 external arrangement – Honeywell SC1000 User Manual
Page 27: 3 rear panel, 4 panel mounting
SC Series Instruction Manual page 27
Ch
assi
s Models
4
4.3 Models SC1000 and SC2000
4.3.1 Differences
Model SC1000 instruments do not include peak/valley capture or limits features.
All other SC instruments include peak/valley capture and 4 limit (“alarm”) outputs.
4.3.2 External Arrangement
The external arrangement of the AC powered SC1000 and SC2000 is given
below.
Figure 4-1: External Arrangement of AC powered SC1000 and SC2000
4.3.3 Rear Panel
The pinout for the 25-pin System connector is provided later in this chapter. The
pinouts for the individual channels are located in the chapter for that channel.
4.3.4 Panel Mounting
The panel cutout size conforms to the 3/8 DIN standard. Panel-Mounting Jacks
(order code AA928) are available that slide into two slots at the sides of the instru-
ment. Use the following procedure to mount an SC1000 or SC2000 into a panel.
0123456789ABCDEF
0123456789ABCDEF