Honeywell 69-2043EFS - Manual

INSTALLATION INSTRUCTIONS
69-2043EFS
50022037-001
Outdoor Sensor Interface Module
APPLICATION
The Outdoor Sensor Interface Module allows a C7089U
outdoor sensor to be used to report outdoor temperature to
the EnviraCOM bus. The module is designed to enable
outdoor temperature sensing for VisionPRO ® IAQ TH9421
thermostats when used with W8835 EnviraZone zone control
panels. The Outdoor Sensor Interface Module is required
when using a C7089U temperature sensor with the W8835
Envirazone panel.
FEATURES:
• Can be wired into any of the 1,2,3 Enviracom terminals
on the W8835 panel.
• Mounts easily next to the W8835 panel.
• Easy push wire terminals that provide a secure lock
with no need to screw in wires.
INSTALLATION
1. The Outdoor Sensor Interface Module can be wall
mounted in any orientation desired or dictated by the
surroundings.
2. The holes are sized for the #6 sheet metal screws.
3. Precise leveling of the product is not required.
4. Wire the 1,2, and 3 terminals on the Outdoor Sensor
Interface Module to the 1,2, and 3 terminals on the
W8835 panel.
5. Wire the 2 wires from the C7089U temperature sensor
into the OT terminals. One wire inserted into 1 OT termi-
nal, the other wire inserted into the other OT terminal.
Fig. 1. Outdoor sensor interface module wiring diagram.
OUTDOOR SENSOR INTERFACE
MODULE - 50022037
OT
1
W8835 PANEL
C70809U OUTDOOR
TEMPERATURE SENSOR
2 3
1 2 3 OT
M23812