Table 3-7. bios setup menus and parameters -28 – HP PAVILION NX9005 User Manual
Page 125

3-28
Troubleshooting and Diagnostics
Service Manual
3.
The pointing devices are not active in BIOS Setup, so you will need to use the keyboard to navigate:
! Press the LEFT and RIGHT arrow keys to move among menus
! Press the UP and DOWN arrow keys to move among parameters in a menu
! Press
F5
or
F6
to move through values for the current parameter, or press
enter
to change
a setting
4.
After you select the options you want, press
F10
or use the Exit menu to exit BIOS Setup
If the settings cause a conflict between devices during reboot, the system prompts you to run BIOS
Setup, and marks the conflicting settings
NOTE: The listings in the following table are for the initial BIOS release and might differ somewhat for
other models
Table 3-7 BIOS Setup Menus and Parameters
All notebook models: Introduced with BIOS version KE0104 (Fall 2002)
Main Menu
Description
Default
BIOS Revision
Shows the current BIOS version
Detected
automatically
System Time
Sets the time using 24-hour format Values set take effect immediately
System Date
Sets the date using dd/mm/yy format (except English, which uses
mm/dd/yy format)
Language
Sets the language for BIOS Setup
Detected
automatically
Internal Hard Disk
Sets the hard disk drive type and various parameters
Detected
automatically
Extended Memory
Shows the extended memory size
Detected
automatically
CPU Serial Number
For a Pentium processor with a serial number, makes the serial
number available to software
Disabled
Serial Number
Displays the serial number as shown on the back of the notebook
Detected
automatically
PC ID
Displays the PC ID String stored in the reserved part of RAM
Service ID
Displays an identifier used for repair service
Detected
automatically
UUID
Displays the value of the 16-byte UUID (Universally Unique ID) as
32 hex characters
Detected
automatically
MAC Address
Displays the MAC network address of the internal (wired) LAN, if
present
Detected
automatically