HP R12000 XR - Manual (Page 33)

LCD Configuration and Status
Displaying the Frequency, Power, and Current Data
Select Meters on the Main Menu to view the frequency, power and current of either the main
module or any of the other electronics modules.
Main Menu
Meters
This submenu provides information on virtual meters monitoring the UPS voltages. Scroll up
and down through the menu using the Center button. If the words continue off the screen,
scroll right and left to read the message. Press the Enter button to view selections. Table 3-5
lists the options under the Meters menu.
Table 3-5: Main Module and Electronics Modules M1-M4 Meter Options
LCD Display Explanation
Input Volts The utility voltage
Output Volts The voltage available at the UPS output receptacles
Input Frequency The utility frequency in Hertz
Output Frequency The frequency in Hertz available at the UPS output
receptacles
Output Power
│ ❚❚❚❚❚❚❚❚❚❚│❚❚ MM or Mx
The output power is shown in a bar graph. This example
shows 120% load (overload). There are ten squares in
front of the 100% line. Each represents a 10% load. The
two squares past the line each represent 10% of overload
(20% overload in all).
Output Power
│ ❚❚❚❚❚❚----│-- MM or Mx
In contrast, this display shows a 60% load.
Battery Volts The battery voltage
Input Current The input current
HP Uninterruptible Power System R12000 XR Models User Guide 3-9
HP CONFIDENTIAL Codename: Sierra Part Number: 146316-002 Last Saved On: 1/24/03 10:15 AM