HP R12000 XR - Manual (Page 19)

Operation
Front Panel LEDs
The front panel has five LEDs that indicate the status of the UPS.
1 2 3 4 5
Item Description Symbol Meaning
1 Utility Solid green
Normal operation
Rapidly flashing green—Ramp Up mode
Slowly flashing green
Standby mode (batteries charging)
2 Battery Solid amber
On Battery
Flashing amber
Battery test in progress
3 Bypass Solid amber
On Bypass
Flashing amber—Bypass not available
4 Alarm Solid red
One or more alarms may be present or active
5 Redundant Solid green
N+1 mode (one or more redundant electronics
modules operating in system)
Flashing green—Battery self-test initiated
Off
Non-redundant, not N+1 mode
Figure 2-3: Front panel LED display
NOTE: The LED lights cycle when no electronics modules are installed and utility is present. In
Standby mode, there is no output but the batteries will be charging. The time required to reach Standby
mode can range from 45 seconds to several minutes, depending on the state of charge of the batteries.
HP Uninterruptible Power System R12000 XR Models User Guide 2-3
HP CONFIDENTIAL Codename: Sierra Part Number: 146316-002 Last Saved On: 1/24/03 10:14 AM