Humminbird 1197C SI - Manual (Page 172)

Time Format
(Advanced, International only)
Time Format changes the time format used by the unit This menu choice is available only when in
Advanced User Mode (see Setup Menu Tab: User Mode.) International models only. Time Format
selects a 12 hour or 24 hour format for the time of day displayed when Time + Date is selected as a Digital
Readout (see Navigation X-Press™: Select Readouts).
To change the Time Format:
1. Make sure you are in Advanced User Mode, then highlight Time Format on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Time Format. (12 hour, 24 hour,
Default = 12 hour)
Date Format
(Advanced, International only)
Date Format changes the date format used by the unit This menu choice is available only when in
Advanced User Mode (see Setup Menu Tab: User Mode.) International models only. Date Format selects
the format for the date display when Time + Date is selected as a Digital Readout (see Navigation
X-Press™: Select Readouts).
To change the Date Format:
1. Make sure you are in Advanced User Mode, then highlight Date Format on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Date Format. (mm/dd/yy,
dd.mm.yy or yy.mm.dd, Default = mm/dd/yy)
Digits Format
(Advanced)
Digits Format allows you to add a tenth decimal place to readouts such as Temperature and Depth. The
format can be changed to small format, large format or no format. This menu choice is available only when
in Advanced User Mode (see Setup Menu Tab: User Mode.)
To change the Digits Format setting:
1. Make sure you are in Advanced User Mode, then highlight Digits Format on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Digits Format setting. (Small
tenths, Large tenths, No tenths, Default = Large tenths)
NOTE: If you choose No Tenths, the display will only show numbers rounded to whole numbers.
164
531617-1_A - 1197c_ManE.qxp 11/6/2007 4:40 AM Page 164