Humminbird 1197C SI - Manual (Page 164)

Units - Speed
(with Speed input only)
Units - Speed selects the units of measure for speed-related readouts.
To change the Units - Speed setting:
1. Highlight Units - Speed on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Speed setting. (kph
[International models only], mph, kts, Default = kph for International models and mph for Domestic
models)
User Mode
User Mode sets the menu system to either Normal or Advanced. When
set to Normal, only the basic menu options are shown. When set to Advanced (default setting), additional
menu choices are available.
To change the User Mode setting:
1. Highlight User Mode on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User Mode setting. (Normal,
Advanced, Default = Advanced)
Language
(International only)
Language selects the display language for menus. International models only.
To change the Language setting:
1. Highlight Language on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Language setting. (Default =
English)
Triplog Reset
(with Speed input only)
Triplog Reset resets the Triplog to zero. The Triplog provides the following information: timer for elapsed time,
distance traveled since last reset, and average speed.
To Reset Triplog:
1. Highlight Reset Triplog on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.
3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT Cursor key once more.
To cancel Reset Triplog, press the LEFT Cursor key.
156
531617-1_A - 1197c_ManE.qxp 11/6/2007 4:39 AM Page 156