HP xw8000 - Manual (Page 38)

QuickSpecs
HP Workstation xw8000
DA-11506 North America — Version 11 — June 2, 2003 38
Technical Specifications
Dimensions 6.4 x 4.8 x 0.8 inches (16.3 x 12.1 x 1.9 cm) Intel Pro 1000 MT NIC DC193A
Connector RJ-45
Controller Intel 82540EM Gigabit Controller
Memory Integrated 96 Kb frame buffer memory
Data rates supported 10/100/1000 Mbps
Compliance IEEE 802.1A, 802.1P, 802.1P, 802.1Q, 802.2, 802.3, 802.3AB and 802.3u
compliant, 802.3x flow control
Bus architecture PCI 2.2
Data path width 32-bit, 33/66 MHz bus interface
Data transfer mode Bus-master DMA
Hardware certifications FCC, B, CE, TUV- cTUVus Mark Canada and United States, TUV- GS Mark for
European Union
Power requirement 1.48 watts @ +3.3V AUX supply with 5V tolerance
Boot ROM support Yes
Network transfer rate 10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T, 1000 Mbps
Environmental Operating temperature 32° to 131°F (0° to 55° C)
Operating humidity 85% at 131° F (55° C)
Environmental Operating temperature 32° to 131°F (0° to 55° C)
Management capabilities ACPI, WOL and DMI 2.0, PXE 2.0, WfM 2.0, Intel PROset II utility
Kit contents The Intel Pro 1000 MT NIC, CD containing Intel PROset II NIC drivers, quick
install guide, product warranty statement