HP xw8000 - Manual (Page 36)

QuickSpecs
HP Workstation xw8000
DA-11506 North America — Version 11 — June 2, 2003 36
Technical Specifications
Capacity 4.7 GB DVD disc / 700 MB CD disc 16/10/40+4/2.4/8x 4.7 GB
DVD
++++ RW – 300i Dimensions (HxWxD) 4.23 x 14.6 x 19.8 cm / 1.66 x 5.83 x 7.74 in
Weight 1.06 kg / 2.3 lb
Interface ATAPI/EIDE
Mounting Orientation Horizontal (80 or 120 mm discs) or vertical (120 mm discs only)
Data Transfer Rates - Read Digital audio extraction (minimum) —1,200 KB/s (8X)
CD read — up to 6,000 KB/s (40X)
DVD read — up to 10,800 KB/s (8X)
Media and Formats - Read CD formats: CD-DA (Red Book), CD-ROM (Modes 1 and 2 - Yellow Book), CD-
ROM XA (Mode 2, Forms 1 and 2), CD-I (FMV), Photo CD (single and multi-
session), Video CD, CD-Text, CD Extra; CD media: stamped, CD-R, CD-RW
DVD formats: DVD-ROM, DVD-Video (with application support); DVD media:
stamped (single or dual layer, single sided), DVD
+ RW, DVD + R, DVD-R, DVD-
RW
Data Transfer Rates - Write DVD+R write — 5,412 KB/s (4X)
DVD+RW write or rewrite — 3,247 KB/s (2.4X)
CD-R write — 600 KB/s (4X)
CD-R write — 1200 KB/s (8X)
CD-R write — 2,400 KB/s (16X)
CD-RW write — 600 KB/s (4X)
CD-RW write —1500 KB/s (10X)
Media and Formats - Write CD formats: CD-DA (Red Book), CD-ROM (Modes 1 and 2 - Yellow Book), CD-
ROM XA (Mode 2, Forms 1 and 2), CD-I (FMV), Photo CD (single and multi-
session), Video CD, CD-Text, CD Extra; CD media: CD-R, CD-RW
DVD formats: DVD-ROM, DVD-Video (with application support); DVD media:
DVD
+ RW, DVD + R
Write Methods Disc-at-once, track-at-once, incremental fixed and variable packet, random
access write (DVD+RW only), sequential write (DVD +R, +RW)
Data Transfer Modes ATA PIO mode 4—16.7-Mbps, ATA UltraDMA mode 2—33-Mbps (default)
Access Times (typical) DVD-ROM Single Layer
Random 140 ms
CD-ROM Random 120 ms
CD-ROM Full stroke 200 ms
Start-up Time (typical) < 5 s
Stop Time (typical) < 6 s
Write Buffer Size 2 MB (minimum)
Audio Output Line-Out 0.75 VRMS
Signal-to-Noise Ratio 75 dB
Channel Separation 60 dB
Configuration Jumper Block Master, slave, and cable select modes
Operating Conditions
Temperature 0 ° to 50 ° C / 32 ° to 122 ° F
Humidity 10% to 70% (non-condensing)