Electrolux B8920 - Manual (Page 65)

Operating Instructions
65
What to do if ...
If you are unable to remedy the fault by following the above sug-
gestions, please contact your local Service Force Centre.
1 Caution! Repairs to the appliance must be carried out by a specially li-
censed technician only! Considerable danger may result from incorrect
repairs.
Fault Possible Cause Remedy
The oven does not heat
The oven is not switched on. Switch the oven on.
The clock is not set.
Set the clock
(see Chapter "Before using
for the first time").
The required settings are not
applied.
Check the settings.
Fault in the power supply.
The electrical protection sys-
tem or fuse has tripped.
Check the fuses or protection
system.
If this happens repeatedly,
call an authorised electrician.
Even though oven
function and tempera-
ture have been se-
lected, the oven does
not heat up.
An automatic programme
has been set to run at a later
time.
Cancel the automatic clock
settings, or set them again.
The meat probe
does not work. The meat probe is not in-
serted correctly, or is faulty.
Check the meat probe socket.
The Service symbol ap-
pears, along with an
error code.
Fault in the electronic sys-
tem. Call your local Service Force
Centre.
The time display flashes
on the electronic clock.
Power cut.
Set the clock
(see Chapter "Before using
for the first time").
The oven light
does not come on.
The oven light bulb is faulty.
Replace the oven light bulb
(see Chapter "Care and
Cleaning").