Electrolux B8920 User Manual
Page 32
Operating Instructions
32
4. Press the COOK TIME
Ì or END Í button and, using the i or j
button, set the desired cooking time or switch-off time.
After about 2 minutes, the first steam appears.
A single audible signal indicates when the cooking temperature of
around 96°C is reached.
Three signals are sounded at the end of cooking time.
5. Stop the signal and switch off the oven by pressing the OFF I button.
After the oven has cooled down, soak up any remaining water from the
steam generator and wipe if necessary with a few drops of vinegar.
Leave the door open to let the oven dry out.
Steam Interval
Changing from hot air to steam takes place automatically.
1. The water (about. 250 ml) is not poured directly into the steam genera-
tor, but into the drawer in the control panel.
The water supply lasts for around 60 minutes.
2. Switch the oven on with the ON H button.
3. Using the OVEN FUNCTION button
Ë, select the Steam Interval
function
½ and set the desired temperature with the i or j button.
4. Press the COOK TIME
Ì or END Í button and, using the i or j
button, set the desired cooking time or switch-off time.
Then proceed as for Vigorous Steam.