Epson 5500C - Manual (Page 93)

Connecting the ELP Link III Cables 83
3. Connect the Mac mouse cable included with the ELP Link III
set to the MOUSE terminal on the square end of the main cable.
4. If your computer’s mouse cable is still connected to the
computer, disconnect it. Then connect the other end of the Mac
mouse cable included with the ELP Link III kit to the Mouse
port on your Macintosh.
5. Connect either end of the Mac serial cable to the SERIAL
terminal on the square end of the main cable. Connect the other
end of the Mac serial cable to the
printer or modem port
on the back of your Macintosh.
6. Go to page 85 to install the software.
5500.book Page 83 Wednesday, August 4, 1999 4:41 PM