Epson 5500C - Manual (Page 58)

Focusing and Positioning the Screen Image 49
If you need to raise or lower the image on the screen, extend or
retract the foot at the bottom front of the projector as follows:
1. Stand behind the projector and support the front of it while you
lift the blue foot adjust levers above the adjustable foot. This
unlocks the foot so it can move up and down. Be careful not to
drop the projector.
✦ Caution: Don’t hold or lift the projector by its lens. This can
damage
the lens.
2. While lifting the foot adjust levers, raise or lower the projector
until the screen image is correctly positioned.
3. Release the levers to lock the foot in its new position.
rear feet (left
foot not visible)
adjustable foot
foot adjust levers
5500.book Page 49 Wednesday, August 4, 1999 4:41 PM