Emerson Autochangeover Controllers AC8 - Manual (Page 93)

View Status Menus
85
A.4 V
IEW
S
TATUS
M
ENUS
The View Status menu allows any user to view currently active alarms, monitoring data stored in the
alarm, event and trend logs, the status of all inputs and outputs, and the four pager numbers.
Main Menu
After connecting to the Service Terminal Interface, the Main Menu appears, as shown below. This
section presents Service Terminal Interface screens for options 1 through 7:
A.4.1 View Active Alarms
For details on this feature, see 5.1 - View Active Alarms.
Main Menu
LIEBERT AC8
VX.XXX.X
LIEBERT CORPORATION COPYRIGHT 2005
ALL RIGHTS RESERVED
MAIN MENU
For sample screens, see:
1=VIEW ACTIVE ALARMS Section A.4.1
2=VIEW ALARM LOG Section A.4.2
3=VIEW EVENT LOG Section A.4.3
4=VIEW TREND LOG Section A.4.4
5=VIEW INPUT & SENSOR STATUS Section A.4.5
6=VIEW OUTPUT STATUS Section A.4.6
7=VIEW PAGER NUMBERS Section A.4.7
8=SILENCE ALARM
9=BACKUP LOG FILES
A=VIEW OPERATION STATUS Section A.4.8
B=VIEW CONTROL RELAYS STATUS Section A.4.9
0=SETUP SYSTEM - LOGIN REQUIRED
SELECT A NUMBER:1
View Active Alarms
ACTIVE ALARMS
Input points/hardware
presently in an alarm state
SENSOR_1 101.1 DEG
HIGH SETPOINT ALARM
SENSOR_2 ------ DEG
SENSOR PROBLEM
DEVICE_7 ALARM
CONTACT OPEN
BATTERY
CHECK BATTERY
=MORE =EXIT =ALL
1=REFRESH ACTIVE ALARMS
2=RETURN TO MAIN MENU
SELECT A NUMBER: