Emerson Autochangeover Controllers AC8 - Manual (Page 116)

Setup Menu
108
Standby Testing
For details on this feature, see 7.10.2 - Turn Standby Testing On or Off.
Setup Operation - Standby Testing
SETUP OPERATION BY ZONE
Select the zone for which
operation is to change
ZONE
1=ZONE 1
2=ZONE 2
3=ZONE 3
4=ZONE 4
5=RETURN TO SETUP MENU
6=RETURN TO MAIN MENU
SELECT A NUMBER:1
SETUP OPERATION
Select operation to edit
for zone 1
OPERATION STATE
1=AUTO SEQUENCING OFF
2=STANDBY TESTING OFF
3=FAILED STANDBY N
4=HOLD DELAY 10:00
5=RESTART DELAY 00:06
6=STAGING OFF
7=RETURN TO SETUP MENU
8=RETURN TO MAIN MENU
SELECT A NUMBER:2
>STANDBY TESTING-TYPE N FOR ON, F FOR OFF
>[N]
>[N]
>COMMAND SUCCESSFUL
>EVERY ## DAYS
>[03] DAYS
>[03]
>COMMAND SUCCESSFUL
>AT
>[00:00]
>[00:00]
>COMMAND SUCCESSFUL
>FOR
>[10] MIN
>[10]
>COMMAND SUCCESSFUL