Emerson Autochangeover Controllers AC8 - Manual (Page 113)

Setup Menu
105
Setup Service Phone Number
For details on this feature, see 7.9.6 - Setup Serv Ph Num - Enter Phone Number and 7.9.7 -
Setup Serv Ph Num - Communications Check (Service Terminal Interface only).
Factory Defaults
For details on this feature, see 7.9.8 - Factory Defaults.
Setup Service Phone Number
SETUP SERVICE PHONE NUMBER
This number receives all alarms
in addition to the 4 pagers
CURRENT NUMBER
1=SETUP SERVICE PHONE NUMBER
2=RETURN TO SETUP SYSTEM INFO MENU
******************
3=RETURN TO SETUP MENU An “M” is required
4=RETURN TO MAIN MENU as 1st character.
******************
SELECT A NUMBER:1
>ENTER SERVICE PHONE NUMBER(40 CHARACTERS MAX).
>[]
>[
>COMMAND SUCCESSFUL
>ENABLE COMMUNICATIONS CHECK-YES(Y) OR NO(N)? (Service Terminal Interface only)
>[N]
>
>COMMAND SUCCESSFUL
>ENTER TIME TO PERFORM COMMUNICATIONS CHECK(HH:MM).
(Service Terminal Interface only)
>[00:00]
>[
>COMMAND SUCCESSFUL
Factory Defaults
RESTORE FACTORY DEFAULTS
This command restores all panel
information to factory settings
1=RESTORE FACTORY DEFAULTS
2=RETURN TO SETUP SYSTEM INFO MENU
3=RETURN TO SETUP MENU
4=RETURN TO MAIN MENU
SELECT A NUMBER:1
>RESTORE THE PANEL TO FACTORY SETTINGS-YES(Y) OR NO(N)?
>[N]
[[
>COMMAND SUCCESSFUL