Emerson Autochangeover Controllers AC8 - Manual (Page 105)

Setup Menu
97
A.6.1 Setup Inputs
For details on this feature, see 7.3 - Setup System - Setup Inputs.
A.6.2 Setup Common Alarm
For details on this feature, see 7.4 - Setup System - Setup Common Alarm.
Setup Inputs
SETUP INPUTS
Setup input of device
Select input to edit
INPUT DEFINITION
1=DEVICE_1 NO-EV-NL-00:01
2=DEVICE_2 NO-AL-L -00:01
3=DEVICE_3 NC-EV-NL-00:01
4=DEVICE_4 NO-AL-L -00:01
5=DEVICE_5 NC-AL-L -00:01
6=DEVICE_6 NO-EV-NL-00:01
7=DEVICE_7 NO-AL-L -00:01
8=DEVICE_8 NC-EV-NL-00:01
9=RETURN TO SETUP MENU
0=RETURN TO MAIN MENU
SELECT A NUMBER:1
****************************
NO=NORMALLY OPENED
NC=NORMALLY CLOSED
EV=EVENT
AL=ALARMABLE
NL=NOT LATCHED
L =LATCHED
MIN:SEC=DELAY TIME BEFORE
INPUT WILL TRIGGER
NOTE:EVENT CANNOT BE LATCHED
****************************
>CHANGE LABEL(8 CHARACTERS MAX).
>[DEVICE_1]
>[]
>IS INPUT NORMALLY OPENED(NO) OR NORMALLY CLOSED(NC)?
>[NO]
>[]
>IS INPUT AN ALARM(AL) OR EVENT(EV)?
>[EV]
>[]
>IS ALARM LATCHED-YES(Y) OR NO(N)?
>[N]
>[]
>DELAY TIME BEFORE TRIGGER (MM:SS)?
>[00:01]
>[]
Setup Common Alarm
SETUP COMMON ALARM
Select if the common
alarm relay contact
is to reset with
silence alarm
CURRENT
SETTING
1=SETUP COMMON ALARM N
2=RETURN TO SETUP MENU
3=RETURN TO MAIN MENU
SELECT A NUMBER:1
>RESET COMMON ALARM WITH SILENCE-YES(Y) OR NO(N)?
>[N]
>[