Epson 62c/82c - Manual (Page 94)

94 Solving Problems
You have lost the remote control.
You need the remote control to access many projector features. If you
have lost it, you can order another from Epson. See page 96 for details
about ordering.
You can’t control the mouse pointer with the remote
control.
■ Make sure the USB mouse cable is securely connected to both
your computer’s USB port and the projector’s USB port. For
details, see page 21.
■ Your computer must be connected to the
Computer1(Component) or Computer2(Component) port on
the projector in order to control your mouse pointer with the
remote control.
■ Make sure USB is selected as the COM Port setting in the
Extended menu. See page 63.
■ To use the USB mouse connection on a PC, your system must
have a “clean” installation of Windows 98, Windows Me,
Windows XP, or Windows 2000. The connection may not work
correctly if your system was upgraded from Windows 95.
■ If you’re running Windows 98 or Me, you may need to install
USB drivers from your Windows CD-ROM. After you install the
drivers, restart both the computer and the projector to
resynchronize the setup.