Epson 62c/82c - Manual (Page 29)

Setting Up the Projector 29
Playing Sound Through the Projector
The projector has a built-in speaker with a maximum output of 5 W.
You can play sound from your video equipment through the
projector’s speaker if your video device has an audio output port.
For RCA-Style Audio Output Ports
Most video devices have an RCA-style audio output port. In this case,
use a commercially available audio adapter to connect the projector to
your video source:
1. Connect the 3.5-mm stereo miniplug end of the audio adapter
cable to the Audio jack corresponding to your video source. For
example, if you’ve connected your video device to the projector’s
Video port, connect the adapter to the Audio jack next to it.
2. Connect the red and white plugs on the other end of the audio
adapter cable to the corresponding color-coded audio output port
on your video source.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 32 for instructions.
note
To play sound from a source,
you must connect the audio
cable to the correct audio
jack.
When you switch the video
source, the projector
automatically plays sound
from the new source.