Epson 62c/82c - Manual (Page 37)

Projecting 37
3. Drag one monitor icon on top of the other.
If the Arrange option isn’t available, you may need to select one of
the Simulscan resolution settings:
1. Click the Monitor icon, if necessary.
2. Select a Simulscan resolution, as shown. (Allow a few seconds
for the projector to sync up after making the selection.)
Adjusting the Image
Once you see your image, you’ll need to make certain adjustments:
■ To focus or zoom your image, see page 38.
■ If the image is too high or too low, you can reposition it.
See page 38.
■ If the image isn’t square, see page 39.
■ To adjust image brightness, see page 40.
■ If a computer image displays incorrectly, see page 40.
■ To change the color mode for your image and surroundings, see
page 41.
You can make many other adjustments to the image—such as
changing the brightness, contrast, and aspect ratio—using the
projector’s menu system. See Chapter 4 for more information.
Click here
Select a
Simulscan
resolution