Epson 62c/82c - Manual (Page 60)

60 Fine-tuning the Projector
■ Computer 2 Input
Selects the signal from equipment connected to the
Computer2(Component) port. If your image colors look
wrong, try changing this setting from Auto to one of the
following: RGB for computer or RGB video sources, or
Component Video for component video sources.
■ Video Signal (composite and S-Video)
Leave this setting at Auto unless you are using a 60-Hz PAL
system (select PAL60 ).
■ Resize (video)
Sets the image’s aspect ratio (ratio of width to height) to 4:3
for letterbox video content and to 16:9 for widescreen video
content.
4. When you’re finished adjusting the signal settings, press Esc or
Menu .
Customizing Projector Features
The Settings menu lets you customize the way you use the projector,
from adjusting lamp brightness and speaker volume to changing the
shape of the mouse pointer.
1. Press the Menu button.
2. Select the Settings menu.