Epson S1C62 Family - Manual (Page 116)

ICE CONTROL SOFTWARE ICS62XX
VIII-2 EPSON S1C62 FAMILY
DEVELOPMENT TOOL REFERENCE MANUAL
2 S5U1C62000H SPECIFICATIONS
2.1 Features
The ICE (S5U1C62000H) is a microcomputer
software development support tool that increases
the efficiency of software development for the
S1C62 Family of 4-bit single chip microcomput-
ers.
The ICE and the S1C62 Family evaluation board
(S5U1C62xxxE), when used in combination,
provide an exceptionally powerful hardware and
software development support environment.
The following flow chart shows the creation
sequence of the single chip microcomputer
system from development through mass produc-
tion.
Use of the ICE and evaluation board can greatly
shorten the development process time required
for debugging and system evaluation procedures.
Determination of specifications
Software
development
Prototype operation
Operation of target
system connected to
an evaluation board
Debugging and
system evaluation
Sample order
Sample evaluation
Mass production order
Mass production
Hardware Software
General purpose
personal computers,
cross assemblers, etc
Debug procedure with
ICE, evaluation board,
target and peripheral
devices connected
Fig. 2.1.1
Development flow
2.1.1
Description
A description of the ICE follows.
(1) The ICE operates by connecting to a general purpose personal computer (IBM PC/XT, PC/AT). The
debugging environment is constructed by the user's personal computer acting as the host system.
(2) High-performance emulation commands are provided. A variety of commands are supplied, such as a
register value implemented break function, on-the-fly data display, history display, and other high-
level functions.
(3) The ICE is equipped with a special power supply. This power source supplies V DD to the evaluation
board, making additional power supply from the user side unnecessary.
(4) The ICE can also be used to analyze hardware. Hardware debugging is supported through the SYNC
and HALT terminals.
2.1.2
Software configuration
OS (Operating System)
PC-DOS
ASM62XX
Cross
Assembler
General
Purpose
Editor
ICS62XX
ICE Control
Software
ICE
Firmware
Application
Program
Control program
mounted on
the ICE
Customer's application
program mounted on
the ICE (ROM)
ICE control software
runs on personal
computer (FD)
Cross Assembler
leased the S1C62XXX (FD)
Fig. 2.1.2.1 Software configuration