Emerson Liebert IntelliSlot IS-WEB485ADPT - Manual (Page 53)

Updating the Firmware - Xmodem (Serial) Method
A9
11. During the update, the window displays a progress bar, as shown below left.
After the firmware update is completed, the card will reinitialize automatically. A reboot mes-
sage, as shown below right, remains until the rebooting is finished.
When the rebooting is complete, the Web browser window returns to the default opening view. The
upgrade is now complete.
Check the new firmware version if you wish (see A.3.2 - Determine the Liebert IntelliSlot Card
Type and Firmware Version).
A.6 U
PDATING THE
F
IRMWARE
- X
MODEM
(S
ERIAL
) M
ETHOD
Follow these steps to update the firmware using the Xmodem (serial) method. This method works
through the Web card’s serial port, employing terminal emulation software, such as HyperTerminal.
NOTE
Do not close the Web browser during this process or the update will abort.
NOTE
This method includes a time-sensitive operation requiring expeditious location of the upgrade
files downloaded in A.3.3 - Download the Firmware Upgrade File to the Computer.
Read through this entire section before beginning the upgrade.
Progress
of update