Emerson Liebert IntelliSlot IS-WEB485ADPT - Manual (Page 35)

Messaging
31
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To activate and set up SMS messages:
1. Choose Messaging from the Main Menu, then SMS.
2. To enable the SMS feature, enter y (yes) at the prompt.
3. Choose SMS Configuration from the Messaging Menu, then select an option and use the
following guide to make changes.
Web Interface
To access SMS Configuration through the Web interface:
• Click on the Configure tab, then SMS in the left panel and finally Edit in the right panel. After
making changes, click Save.
Enable SMS [y/n] ?>
Table 20 SMS configuration guide
Parameter Description Maximum
SMS From
The e-mail address of the sender—for example, [email protected]—
typically, the address where replies should be sent.
64
characters
SMS Message
Recipients
The message will be sent to this list of addresses. The SMS/Text Message
address is usually a 10-digit phone number followed by @____.com (where ____
might be a company name). To add an SMS address, use the format
a [email protected]. Multiple addresses must be added individually.
Changes may be made by entering d to delete an entry or e to edit an entry.
NOTE: To specify multiple recipients of the SMS message in the Web interface,
use a semicolon (;) to separate addresses in the SMS To box.
64
characters
SMS Subject
The subject line of the message. By default, this is the event description—e.g.,
AlarmOnBypass—but it may be customized.
120
characters
SMS Customize
Message
The text of the message sent to e-mail recipients. Choose from a list of items to
include in the message. For details, see 6.3 - Customize Messages.
—
SMTP Server The IP address or domain name of the SMTP e-mail server that sends messages.
32
characters
Port SMTP server port—typically the default port, 25. —
Test SMS
After saving changes to SMS parameters, send a test SMS message to verify the
settings are correct. The message status will be displayed.
—
View Test
SMS Log File
Choose this option to display a log showing the results of test messages. —
SMS
Configure tab
Edit