Emerson Liebert IntelliSlot IS-WEB485ADPT - Manual (Page 16)

Network Settings
12
5.0 N
ETWORK
S
ETTINGS
The IP Network Settings Menu is used to enable network
communications with the Web card.
Refer to the following sections for detailed step-by-step
instructions on each item from this menu:
Table 8
Network Settings menu guide
Menu item Refer to:
5.1 - Boot/IP Settings page 13
5.2 - Domain Name Server (DNS) Settings page 14
5.3 - Management Protocol page 15
5.4 - Web Server page 19
5.5 - Telnet Server page 24
5.6 - Time (SNTP) Menu page 24
5.7 - Change Username / Password page 26
5.8 - Reset Authentication to Factory Defaults page 27
IP Network Settings Menu
-------------------------
1: Boot/IP Settings
2: Domain Name Server (DNS) Settings
3: Management Protocol
4: Web Server
5: Telnet Server
6: Time (SNTP)
7. Change Administrator Username/Password
8: Change General Username/Password
9: Reset Authentication to Factory
Defaults
: Cancel menu level
Please select a key ?>