Angleoffset property – Epson 5 User Manual

Page 25

AngleOffset Property

Applies To

Vision Objects: Polar

Description

An angle value which is used as an offset to line up the Polar Search direction indicator (graphic line on the
image display) with the part since it is virtually impossible and normally impractical to teach a polar object
with the proper rotation of a part so that the direction lines up with the part.

Usage

VGet Sequence.Object.AngleOffset, var

VSet Sequence.Object.AngleOffset, value

Sequence Name of a sequence or string variable containing a sequence name.

Object

Name of an object or string variable containing an object name. The object must exist in the
specified sequence.

var

Real variable that will contain the value of the property.

value

Real expression for the new value of the property.

Values

Real number in degrees from 0 - 360

Default: 0

Remarks

The AngleOffset is provided to allow the Polar object's graphic direction indicator to line up with a specific
area on a part. The graphic direction indicator is normally set at the default position for the polar object
which is 0 degrees (at 3 O'clock). The rotation for the AngleOffset property is then defined in a counter
clockwise direction.