Epson Equity 320SX PLUS User Manual
Page 82
The
M[n]
parameter specifies a particular 64KB page frame
address for EMM386SX.SYS. The value
n must be a number
from 1 to 9 to indicate one of the following addresses:
l
Default setting
For example, to specity a page frame address of 0CC000h,
add the following command line to your CONFIG.SYS file:
DEVICE-EMM386SX.SYS /M4
Note
If you have installed an EGA or VGA display adapter card,
you cannot enter the following values for
n:
/Ml
-Ml
/M2
-M2
The P[nnn] parameter specifies the number of handles (or
process ID
S
) available to EMM386SX.SYS. The value for
nnn
must be in the range of 64 to 256. The default value is 64.
The X[nnnn-nnnn] parameter specifies a hexadecimal
memory address range to exclude from mapping by
Eh4M386SX.SYS. The first address
(nnnn) is the beginning
address of the range and the second address
(nnnn) is the
ending address.
4-10
Enhancing System Operations