Epson Equity 320SX PLUS - Manual (Page 117)

I n s t a l l i n g M e m o r y M o d u l e s
There are six SIMM sockets on the main system board
organized in three banks consisting of two sockets each. The
sockets are labelled SIMM1 through SIMM6.
The following table shows all the possible SIMM
configurations for your computer. Do not install SIMMs in
any configuration that is not listed below. Keep in mind that
2MB of memory is already soldered directly on the main
system board.
SIMM configurations
for the
Equity 320sx
PLUS
K = 256KB SIMM 1=1MB SIMM 4 = 4MB SIMM
l
If you install this amount of system memory, only 16MB of it can be
used as extended memory. Any memory above 16MB must be used
as expanded memory.
If you install 24MB of total memory on SIMMs, the computer
disables the 2MB of memory soldered on your main system board.
Installing and Removing Options 6-15