Epson Equity 320SX PLUS - Manual (Page 44)

If you have a composite color monitor, such as a color
television with a video input, try selecting Co1or
80x25. If you find that the monitor’s resolution is poor,
run SETUP again and select Co1or 40x25.
If you have two display adapters of different types, select the
setting for the one you want to be your primary display
adapter. The other one is your secondary adapter.
Note
If you have installed an EGA or VGA display adapter card,
or another type of card that you want to be the primary
display adapter, you must set jumper Jl on the main
system board to disable the built-in VGA interface.
If you install one type of display adapter card and then
change the type of monitor you are using (from color to
monochrome, or vice-versa), you also need to set jumper
J3. If you have two types of cards, set the jumper to match
the monitor that is your primary display. See Chapter 6 for
instructions on changing jumper settings.
Setting the Keyboard Test function
There are two options for the keyboard test function:
Installed or Not installed. Select Installed if you want the
computer to test the operation of the keyboard each time you
turn it on or reset it. Select
Not i ns tall ed
if you want the
computer to skip the keyboard test to save time as you boot
the system.
Running the SETUP Program 2-9