Epson Equity 320SX PLUS User Manual

Page 169

You can stop testing at any time and return to the main

menu by holding down

Ctrl

and pressing

Break

The program

completes the current test before it stops.

You must enter certain parameters to run the hard disk and
diskette drive tests. If you use

to select these tests, the

program prompts you for the parameters immediately. If you
use

F4,

the program prompts you for the parameters during

the first pass of the test. If you perform the tests more than
once, the program uses the same parameters for each pass.

If you selected Passbound testing, the program displays the

pass number on the right side of the screen above the Run
time parameters window. For example:

Pass : 00001

If you entered Y at the W

a i t

on e

r r o r

prompt, the program

pauses if an error occurs.

When you

press

Enter,

the program

continues testing.

Note

Tests selected using the

and

keys remain selected

until you cancel the selection. Be sure to press

to cancel

all selections when you are finished running each set of
tests.

Performing System Diagnostics

B-9