EverFocus PTZ SPEED DOME EPN3600 - Manual (Page 72)

EPN3600
72
pre-and post alarm buffer setting, please refer to “Alarm”.
6. Check “Enable This Event”.
7. Select “Always” for time mask. For detail about Time Mask, please refer
to “2.7.4 Time Mask”.
8. Click to save this event in event list.
Example 2: Alarm input – Go to PTZ Preset with Auto-Tracking
This example describes how to set the camera to go to PTZ preset and start
auto tracking at the preset position when there is alarm input:
1. Click
button in Event page.
2. Enter an event name for the event, e.g. Event 2.
3. Select “Alarm Input1” as event type.