EverFocus PTZ SPEED DOME EPN3600 - Manual (Page 43)

EPN3600
43
If OFF is selected at this step, go to step 2.
2. Select a desired left position by using “Arrow” buttons to locate a
desired position. User can also use “Zoom In/ OUT”, “Focus Far/Near”,
“IRIS +/-“ buttons to help locating a desired position in this step. “PTZ
Speed” option allows user to browse with different speeds, including
High, Standard, Low and Minimum. This step needs to be done only
when Endless Mode is off.
3. Click “Set” button right next to “Set Left Pos.” to save this selected left
position.
4. Repeat step 2 to select a desired right position.
5. Click “Set” button right next to “Set Right Pos.” to save this selected
right position.
6. Select dwell time of the left and right positions from 1~99 seconds
7. Select speed from 1~255.
8. Click “Apply” button to save changes. User can also click “Reset” button
to make options to default values.