EverFocus PTZ SPEED DOME EPN3600 - Manual (Page 58)

EPN3600
58
Figure 2-41 Areas setting – Left Position Setting Window
5. Then the right position setting window shows (See
Figure 2-42 ).User
can select right position by directly controlling from the live screen.
After select desired left position, press “Enter” to confirm.
Figure 2-42 Areas setting – Right Position Setting Window
6. Figure 2-43 will appear and Range section (see red marker in Figure 2-43 )
will flash at this time. To save the change, click Cancel button to save
and exit. To clear current zone setting, click ► button to select
CLR button and clicking Enter button.